Product details
Specification
- 100% Made in Britain
- Safety compliant to BSI PAS888 (legacy standard) for ALL ages, users and non-users but specifically to protect users of small stature and young people under 1.4m tall.
- All TGO outdoor gym equipment is free from exposed end stops, entrapments, sharp edges and crush points.
ALWAYS ASK FOR THE SAFEST OUTDOOR GYMS
Production details
Manufacturer Standard: Safety compliant to BSI PAS888 (legacy standard) for ALL ages, users and non-users but specifically to protect users of small stature and young people under 1.4m tall.
Framework: Mild steel grade S275 (min 3mm thick)
Bearing Surfaces: Grade 316 stainless steel Finish:
High quality gloss finish polyester powder coat paint
Signage Plate: High quality reverse printed PETG
Seats and Backs: Enhanced polyphenylene ether (PPE) resin
Enhanced corrosion protection
An enhanced corrosion protection is available on request for this product. Hot dip galvanising is the process TGO use to add a protective coating to the body of our products on our equipment in coastal areas, which have higher air salinity or in harsh urban and industrial atmospheres with higher sulphur dioxide pollution*.
The upgrade includes:
- Upgrading to hot dip galvanising
- Fixings are upgraded from A2 to A4 stainless steel
*An upgrade to galvanised steel will be necessary for the warranty in these environments.
Installation
This product is installed onto a generic TGO Large Ground Anchor. Please see the ‘TGOGC Installation & Assembly Guidelines’ for guidance on installing this anchor. Please refer to the PDF below for safety spacing and orientation details.
Safety
This product requires 1.5m of clear space around the equipment (green outline).
- Falling height: 0.53m
- Clear Space: 15m²
There is no safer surface requirement and therefore TGO only recommend a minimal surface area (grey outline).